|
How much do you know about the sand making machine production line? More configurations are available for you to choose from.
In recent years, the sandstone industry market has been hot. The demand for the sand making machine production line is relatively large, and for the user, I don’t know how to choose it. The Central Plains area is the concentrated length of the sand making machine production line. Of course, the competition is also very fierce. The Luoyang Dahua sand making machine is complete in variety and can be compared with many large equipment manufacturers to understand the actual market. The following is a configuration scheme for the sand making machine production line, using different sand making machine production lines according to your actual situation.
Configuration 1: Jaw Crusher + Cone Crusher
Feeding + coarse crushing + medium crushing + screening: The material is placed in the jaw crusher by the feeder, then transferred to the cone crushing mobile crusher, and then sieved, mainly used in large stone factories.
Broken material: This production line is mainly suitable for high hardness materials such as river pebbles, granite, marble, basalt and so on. It is commonly used for beneficiation and crushing, and the mining industry has lower emissions requirements. Hammering is thinner than counterattacking and crushing materials, and the yield is high. Mainly used in large stone factories.
Configuration 2: jaw crusher + impact crusher
Feed + coarse crush + medium fine crush + screening: The raw material enters the feeder, is coarsely crushed by a jaw crusher, then transferred to the impact crusher, and then directly sieved, and the conveyor belt is conveyed to the finished product area. The entire process can be used in just two.
Broken material: Since the crusher's crushable material has a compressive strength of less than 350 MPa, the solution is suitable for medium and low hardness materials such as limestone, coal gang stone and construction waste.
Configuration 3: Cone crushing mobile crusher + sieve sand moving crusher
Feeding + crushing + sand making + screening: After the raw materials are crushed by a cone crusher, they are transferred to a sand making mechanism and then sieved. These two devices have a small footprint and are simple to operate.
Sand making material: This production line is mainly used for materials with a particle diameter of less than 600 mm and high hardness. After the cone is crushed and broken, sand is made of sand. The particle size of the material can reach 0-5mm, the particle size is uniform, and the particle shape is beautiful.
Configuration 4: Heavy hammer broken mobile crushing and screening machine
Feeding + crushing + screening: one equipment is ranked in the first two, raw material feeding size ≤ 1200mm, discharging maximum 10mm, one molding to reduce equipment input cost, feeder, heavy hammer crusher (crusher: The screening machines are all on one body).
Damaged material: Brittle material with a hardness of 200 MPa or less and medium and low hardness.
All types of mobile sand making equipment are available at an affordable price. Welcome to contact us or send inquiry.
Contact Person: Ms. Zhao
Tel: 0086-516-66676223
Fax: 86-516-80296064